SUPER-PAIN 1700

«Power for Production»

Chipper with 6 radial blades upon a disk of Ø 1700 mm.
Rotation speed : from 540 to 1500 rpm
Special cutting table thickness of the chips inferior to 4 mm, without any risk of filling-in of the evacuation.
Not any big piece or sawdust
Very strong mechanical-weldment.
Cutting capacity : up to 500 mm diameter (according to the available power).
Output per hour : up to 40 m³ of chipped matter (229 m³ theoretic), according to the type of branches.
Evacuation neck swinging out 360° for loading into trailer (2 m height).
Feeding hopper optimized for feeding with a crane.
Hydraulic bough-dragger (with autonomous hydraulic generator)
Optional feeding table (for mechanical feeding with a crane)
Optional crane for feeding
On three-points tractor, on road or farm trailer, or on frame.

Motorization

Bezin or diesel motor from 200 kW.
Adapted to any standardized tree-points of agricultural tractor driving by the power take-off shaft of tractor, 540 r.p.m. or 1000 r.p.m.

Specific adaptations possible

Move your mouse over the thumbnails or click them to see larger images.

Autonomous SUPER-PAIN 1700 chipper, VOLVO 220kW motor
On road trailer, double 19 t central axles ;
EPSILON crane 5t/m lenght of jib 7m

Autonomous SUPER-PAIN 1700 chipper, VOLVO 220kW motor
On road trailer, double 19 t central axles ;
EPSILON crane 5t/m lenght of jib 7m

SUPER-PAIN 1700 chipper installed on 280hp HESTON silage
NOKKA crane 4,4 t/m, length of jib 7m

Autonomous SUPER-PAIN 1700 chipper, 400 hp motor, on truck.
Jonsered crane, 4,4 t/m, length of jib 7m

Autonomous SUPER-PAIN 1700 chipper, VOLVO 220kW motor
On road trailer, double 19 t central axles ;
EPSILON crane 5t/m lenght of jib 7m

SUPER-PAIN 1700 chipper installed on 280hp HESTON silage
NOKKA crane 4,4 t/m, length of jib 7m

Autonomous SUPER-PAIN 1700 chipper, 400 hp motor, on truck.
Jonsered crane, 4,4 t/m, length of jib 7m